User Manual¶
📢 Welcome to the official assembly and user guide for the MY-CoreXY 3D Printer!
The MY-CoreXY 3D Printer manual is a comprehensive guide designed to assist you from the very first step to your final calibration. This manual is divided into several main sections to provide detailed, step-by-step information on all aspects of your new printer.
- The Getting Started section covers all the preliminary steps, including essential safety warnings, part printing guidelines, and a list of required tools.
- The Assembly Guide provides detailed visual instructions for the entire mechanical build, from the frame to the final enclosure panels.
- The Electronics & Wiring section offers a deep dive into mounting and connecting all electronic components safely and correctly.
- The Initial Setup & First Use guide covers the software installation, Klipper configuration, and the exciting process of turning on your printer and completing your first print.
- The Bill of Materials (BOM) provides a complete checklist of all the parts you will need.
Each section is designed to be user-friendly, with clear instructions and helpful tips to ensure a smooth and successful build experience. Explore the links below to dive into each section.
Sections¶
-
Getting Started
Covers safety, required tools, part printing guidelines, and core assembly techniques before you begin.
-
Assembly Guide
Detailed, step-by-step instructions for the complete mechanical build, from the frame to the final enclosure parts.
-
Electronics & Wiring
A comprehensive guide to mounting and wiring all electronic components, with a strong focus on safety.
-
Initial Setup & First Use
Covers installing Klipper firmware, configuring the software, and guides you through your very first print.
-
Bill of Materials (BOM)
A complete list of all required fasteners, electronics, and mechanical parts needed for the build.