Electronics BOM¶
This document lists all the electronic components required for the MY-CoreXY-3D-Printer.
Non-Printed Parts¶
This section details the non-printed electronic components.
| Part Number | Description | Quantity | Notes |
|---|---|---|---|
| EL-0001 | Controller Board | 1 | e.g., SKR Pro, Duet 3, or similar. |
| EL-0002 | Stepper Motor Driver | 5 | TMC2209 or similar. |
| EL-0003 | Endstop Switch | 3 | Mechanical or optical switches. |
| EL-0004 | Thermistor | 1 | 100K NTC thermistor for the hotend. |
| EL-0005 | Heater Cartridge | 1 | 24V 40W heater cartridge. |
| EL-0006 | Cooling Fan | 2 | 4010 or 5015 fans for part cooling and hotend. |
| EL-0007 | Wiring Kit | 1 | Includes various connectors and wires. |
Printed Parts¶
This section lists all the printed parts for the electronics. All files are provided in the correct orientation for printing.
Printing Instructions¶
The following table shows the recommended print settings.
| Perimeters | Layer Height | Infill | Material | Supports |
|---|---|---|---|---|
| 4 | 0.2mm - 0.3mm | 25% | PETG, ASA or ABS | As needed |
B.O.M. List¶
| Part Number | Description | Quantity | Color | Supports |
|---|---|---|---|---|
| P-EL-0001 | Controller Box | 1 | Accent | No |
| P-EL-0002 | Controller Box Lid | 1 | Accent | No |
| P-EL-0003 | Fan Holder | 2 | Accent | No |