Enclosure BOM¶
This document lists all the parts required to build the enclosure for the MY-CoreXY-3D-Printer.
Non-Printed Parts¶
This section details the non-printed components for the enclosure.
| Part Number | Description | Quantity | Notes |
|---|---|---|---|
| EN-0001 | Acrylic Panel 3mm | 4 | Clear or tinted acrylic panels for the sides. |
| EN-0002 | Door Hinge | 2 | For the front door. |
| EN-0003 | Door Handle | 1 | A simple handle for the door. |
| EN-0004 | Magnetic Catch | 2 | To keep the door closed. |
Printed Parts¶
This section lists all the printed parts for the enclosure. All files are provided in the correct orientation for printing.
Printing Instructions¶
The following table shows the recommended print settings.
| Perimeters | Layer Height | Infill | Material | Supports |
|---|---|---|---|---|
| 4 | 0.2mm - 0.3mm | 25% | PETG, ASA or ABS | As needed |
B.O.M. List¶
| Part Number | Description | Quantity | Color | Supports |
|---|---|---|---|---|
| P-EN-0001 | Panel Holder | 16 | Accent | No |
| P-EN-0002 | Door Hinge Mount | 2 | Accent | No |
| P-EN-0003 | Door Handle Mount | 1 | Accent | No |