Extruder BOM¶
This document lists all the parts required to assemble the extruder for the MY-CoreXY-3D-Printer.
Non-Printed Parts¶
This section details the non-printed components for the extruder.
| Part Number | Description | Quantity | Notes |
|---|---|---|---|
| EX-0001 | Extruder Motor | 1 | NEMA17 pancake stepper motor. |
| EX-0002 | Hotend | 1 | e.g., E3D V6, Phaetus Dragonfly, or similar. |
| EX-0003 | Extruder Gear Kit | 1 | Bondtech or similar dual-drive gears. |
| EX-0004 | PTFE Tube | 1 | For guiding the filament into the hotend. |
| EX-0005 | Pneumatic Fitting | 2 | To connect the PTFE tube. |
Printed Parts¶
This section lists all the printed parts for the extruder. All files are provided in the correct orientation for printing.
Printing Instructions¶
The following table shows the recommended print settings.
| Perimeters | Layer Height | Infill | Material | Supports |
|---|---|---|---|---|
| 4 | 0.2mm - 0.3mm | 25% | PETG, ASA or ABS | As needed |
B.O.M. List¶
| Part Number | Description | Quantity | Color | Supports |
|---|---|---|---|---|
| P-EX-0001 | Extruder Body | 1 | Accent | No |
| P-EX-0002 | Extruder Idler | 1 | Accent | No |
| P-EX-0003 | Fan Duct | 1 | Accent | No |