Gantry BOM¶
This document lists all the parts required to assemble the gantry for the MY-CoreXY-3D-Printer.
Non-Printed Parts¶
This section details the non-printed components for the gantry.
| Part Number | Description | Quantity | Notes |
|---|---|---|---|
| GA-0001 | Linear Rail MGN9 300mm | 2 | For the X-axis. |
| GA-0002 | Linear Rail Carriage MGN9H | 2 | For the X-axis linear rails. |
| GA-0003 | GT2 Timing Belt | 5m | 6mm width. |
| GA-0004 | GT2 Pulley 20T | 2 | For the stepper motors. |
| GA-0005 | Idler Pulley | 2 | Smooth or toothed idlers. |
| GA-0006 | Stepper Motor | 2 | NEMA17 motors for the A and B axes. |
Printed Parts¶
This section lists all the printed parts for the gantry. All files are provided in the correct orientation for printing.
Printing Instructions¶
The following table shows the recommended print settings.
| Perimeters | Layer Height | Infill | Material | Supports |
|---|---|---|---|---|
| 4 | 0.2mm - 0.3mm | 25% | PETG, ASA or ABS | As needed |
B.O.M. List¶
| Part Number | Description | Quantity | Color | Supports |
|---|---|---|---|---|
| P-GA-0001 | X-Carriage | 1 | Accent | No |
| P-GA-0002 | Y-Carriage | 2 | Accent | No |
| P-GA-0003 | Motor Mount | 2 | Accent | No |
| P-GA-0004 | Idler Mount | 2 | Accent | No |
| P-GA-0005 | Belt Tensioner | 2 | Accent | No |