Heat Bed BOM¶
This document lists all the parts required to assemble the heat bed for the MY-CoreXY-3D-Printer.
Non-Printed Parts¶
This section details the non-printed components for the heat bed.
| Part Number | Description | Quantity | Notes |
|---|---|---|---|
| HB-0001 | Heated Bed 220x220mm | 1 | 24V PCB heat bed. |
| HB-0002 | Borosilicate Glass 220x220mm | 1 | Or other build surface like PEI. |
| HB-0003 | Bed Spring | 4 | For leveling the bed. |
| HB-0004 | Thumbwheel | 4 | For adjusting the bed level. |
Printed Parts¶
This section lists all the printed parts for the heat bed. All files are provided in the correct orientation for printing.
Printing Instructions¶
The following table shows the recommended print settings.
| Perimeters | Layer Height | Infill | Material | Supports |
|---|---|---|---|---|
| 4 | 0.2mm - 0.3mm | 25% | PETG, ASA or ABS | As needed |
B.O.M. List¶
| Part Number | Description | Quantity | Color | Supports |
|---|---|---|---|---|
| P-HB-0001 | Bed Support | 1 | Accent | No |