Z-Motion BOM¶
This document lists all the parts required to assemble the Z-axis motion system for the MY-CoreXY-3D-Printer.
Non-Printed Parts¶
This section details the non-printed components for the Z-axis.
| Part Number | Description | Quantity | Notes |
|---|---|---|---|
| ZM-0001 | Stepper Motor | 1 | NEMA17 motor. |
| ZM-0002 | Lead Screw 300mm | 1 | T8 lead screw with 2mm pitch. |
| ZM-0003 | Anti-backlash Nut | 1 | To prevent backlash on the Z-axis. |
| ZM-0004 | Flexible Coupler | 1 | 5mm to 8mm coupler. |
| ZM-0005 | Linear Rod 8mm 350mm | 2 | Hardened steel rods. |
| ZM-0006 | Linear Bearing LM8UU | 4 | For smooth vertical movement. |
Printed Parts¶
This section lists all the printed parts for the Z-axis. All files are provided in the correct orientation for printing.
Printing Instructions¶
The following table shows the recommended print settings.
| Perimeters | Layer Height | Infill | Material | Supports |
|---|---|---|---|---|
| 4 | 0.2mm - 0.3mm | 25% | PETG, ASA or ABS | As needed |
B.O.M. List¶
| Part Number | Description | Quantity | Color | Supports |
|---|---|---|---|---|
| P-ZM-0001 | Z Motor Mount | 1 | Accent | No |
| P-ZM-0002 | Z Rod Holder | 2 | Accent | No |
| P-ZM-0003 | Z Carriage | 1 | Accent | No |