Klipper Interface Guide

The web interface (Mainsail or Fluidd) is your command center. It allows you to control every aspect of your printer from a web browser on any device on your network.

The main dashboard of the web interface, with key areas highlighted: Temperature Graphs, Console, G-Code Viewer, Job Status, and Movement Control Buttons.

Key Interface Sections

• Dashboard: This is your main overview screen. You can monitor temperatures, see the webcam feed, check print job progress, and access emergency stop functions.
• Console: This is a direct command line to your printer. You can send G-code commands manually (e.g., G28 to home) and see real-time responses and logs from Klipper.
• Temperature Control: This area displays live temperature graphs and allows you to manually set target temperatures for your hotend and heated bed.
• Movement Controls: Here you can find buttons to home the X, Y, and Z axes, disable motors, and manually move (jog) the toolhead along each axis.
• File Management: This section lists all your uploaded G-code files. You can upload new files, delete old ones, and start prints from here.
• Configuration: This powerful feature gives you a built-in text editor to view and modify your printer.cfg and any other Klipper configuration files directly from your browser.