Required Tools

Having the right tools on hand will not only make the build process easier and faster, but also safer and more precise. Below is a list of essential and recommended tools.

A Worthy Investment

A set of good-quality hex drivers (Allen keys) is perhaps the most important investment you can make for this build. Poor-quality drivers can strip the heads of screws, causing enormous headaches later on.

A collection of essential tools including hex drivers, digital calipers, a soldering iron, a multimeter, and flush cutters.

Essential Tools

• Hex Drivers (Allen Keys): Sizes 1.5mm, 2.0mm, 2.5mm, 3.0mm. Ball-end drivers are highly recommended.
• Soldering Iron: Essential for installing heat-set inserts and for the wiring section.
• Digital Multimeter: For checking continuity, voltages, and identifying wires. A crucial safety tool.
• Flush Cutters: For cutting zip ties and filament cleanly.
• Hobby Knife (X-Acto): For cleaning up burrs or imperfections on printed parts.
• Digital Calipers: For verifying dimensions and ensuring everything is assembled correctly.
• Wire Strippers: Indispensable for the wiring section.
• Crimping Tool: If you plan to use JST or Dupont connectors for a professional finish.
• Tweezers: Very useful for handling small parts and routing belts.