Skip to content

Slicer

This section presents software recommendations, profiles, and ideal parameters to achieve the best print quality on the MY-Mini-3D-Printer, based on Prusa Mini experience.

Compatible Software

  • PrusaSlicer (recommended)
  • Ultimaker Cura
  • Simplify3D

Base Profile (Prusa Mini)

  • Use the Prusa Mini profile as a starting point.
  • Adjust the print volume to 180x180x180 mm.
  • Enable "mesh bed leveling" and "silent mode" if available.

Suggested Parameters

  • Layer height: 0.2 mm (default), can vary between 0.05 and 0.25 mm
  • Speed: up to 60 mm/s
  • Nozzle temperature: 200–250°C (PLA, PETG, ABS, ASA, TPU, Nylon, PC)
  • Bed temperature: up to 100°C
  • Retraction: 0.8–1.2 mm at 35 mm/s
  • Fan: 100% for PLA, 50% for PETG/ABS

Prusa Mini Tips

  • Use "first layer slow" for better adhesion.
  • Enable "elephant foot compensation" to avoid base expansion.
  • Test different infill patterns (gyroid, grid, cubic).

Downloadable Profiles

  • Optimized profiles for PrusaSlicer and Cura will be available soon in this section.

Share your profiles and tips in the My Machines community!